Structures and Classes

日本語を消す 英語を消す


Model custom types that encapsulate data.

Structures and classes are general-purpose, flexible constructs that become the building blocks of your program’s code. You define properties and methods to add functionality to your structures and classes using the same syntax you use to define constants, variables, and functions.

Unlike other programming languages, Swift doesn’t require you to create separate interface and implementation files for custom structures and classes. In Swift, you define a structure or class in a single file, and the external interface to that class or structure is automatically made available for other code to use.


An instance of a class is traditionally known as an object. However, Swift structures and classes are much closer in functionality than in other languages, and much of this chapter describes functionality that applies to instances of either a class or a structure type. Because of this, the more general term instance is used.

Comparing Structures and Classes

Structures and classes in Swift have many things in common. Both can:

  • Define properties to store values
  • Define methods to provide functionality
  • Define subscripts to provide access to their values using subscript syntax
  • Define initializers to set up their initial state
  • Be extended to expand their functionality beyond a default implementation
  • Conform to protocols to provide standard functionality of a certain kind

For more information, see PropertiesMethodsSubscriptsInitializationExtensions, and Protocols.

Classes have additional capabilities that structures don’t have:

  • Inheritance enables one class to inherit the characteristics of another.
  • Type casting enables you to check and interpret the type of a class instance at runtime.
  • Deinitializers enable an instance of a class to free up any resources it has assigned.
  • Reference counting allows more than one reference to a class instance.

For more information, see InheritanceType CastingDeinitialization, and Automatic Reference Counting.

The additional capabilities that classes support come at the cost of increased complexity. As a general guideline, prefer structures because they’re easier to reason about, and use classes when they’re appropriate or necessary. In practice, this means most of the custom types you define will be structures and enumerations. For a more detailed comparison, see Choosing Between Structures and Classes(


Classes and actors share many of the same characteristics and behaviors. For information about actors, see Concurrency.

Definition Syntax

Structures and classes have a similar definition syntax. You introduce structures with the struct keyword and classes with the class keyword. Both place their entire definition within a pair of braces:

struct SomeStructure {
    // structure definition goes here
class SomeClass {
    // class definition goes here


Whenever you define a new structure or class, you define a new Swift type. Give types UpperCamelCase names (such as SomeStructure and SomeClass here) to match the capitalization of standard Swift types (such as StringInt, and Bool). Give properties and methods lowerCamelCase names (such as frameRate and incrementCount) to differentiate them from type names.

Here’s an example of a structure definition and a class definition:

struct Resolution {
    var width = 0
    var height = 0
class VideoMode {
    var resolution = Resolution()
    var interlaced = false
    var frameRate = 0.0
    var name: String?

The example above defines a new structure called Resolution, to describe a pixel-based display resolution. This structure has two stored properties called width and height. Stored properties are constants or variables that are bundled up and stored as part of the structure or class. These two properties are inferred to be of type Int by setting them to an initial integer value of 0.

The example above also defines a new class called VideoMode, to describe a specific video mode for video display. This class has four variable stored properties. The first, resolution, is initialized with a new Resolution structure instance, which infers a property type of Resolution. For the other three properties, new VideoMode instances will be initialized with an interlaced setting of false (meaning “noninterlaced video”), a playback frame rate of 0.0, and an optional String value called name. The name property is automatically given a default value of nil, or “no name value”, because it’s of an optional type.

Structure and Class Instances

The Resolution structure definition and the VideoMode class definition only describe what a Resolution or VideoMode will look like. They themselves don’t describe a specific resolution or video mode. To do that, you need to create an instance of the structure or class.

The syntax for creating instances is very similar for both structures and classes:

let someResolution = Resolution()
let someVideoMode = VideoMode()

Structures and classes both use initializer syntax for new instances. The simplest form of initializer syntax uses the type name of the class or structure followed by empty parentheses, such as Resolution() or VideoMode(). This creates a new instance of the class or structure, with any properties initialized to their default values. Class and structure initialization is described in more detail in Initialization.

Accessing Properties

You can access the properties of an instance using dot syntax. In dot syntax, you write the property name immediately after the instance name, separated by a period (.), without any spaces:

print("The width of someResolution is \(someResolution.width)")
// Prints "The width of someResolution is 0"

In this example, someResolution.width refers to the width property of someResolution, and returns its default initial value of 0.

You can drill down into subproperties, such as the width property in the resolution property of a VideoMode:

print("The width of someVideoMode is \(someVideoMode.resolution.width)")
// Prints "The width of someVideoMode is 0"

You can also use dot syntax to assign a new value to a variable property:

someVideoMode.resolution.width = 1280
print("The width of someVideoMode is now \(someVideoMode.resolution.width)")
// Prints "The width of someVideoMode is now 1280"

Memberwise Initializers for Structure Types

All structures have an automatically generated memberwise initializer, which you can use to initialize the member properties of new structure instances. Initial values for the properties of the new instance can be passed to the memberwise initializer by name:

let vga = Resolution(width: 640, height: 480)

Unlike structures, class instances don’t receive a default memberwise initializer. Initializers are described in more detail in Initialization.

Structures and Enumerations Are Value Types

value type is a type whose value is copied when it’s assigned to a variable or constant, or when it’s passed to a function.

You’ve actually been using value types extensively throughout the previous chapters. In fact, all of the basic types in Swift — integers, floating-point numbers, Booleans, strings, arrays and dictionaries — are value types, and are implemented as structures behind the scenes.

All structures and enumerations are value types in Swift. This means that any structure and enumeration instances you create — and any value types they have as properties — are always copied when they’re passed around in your code.


Collections defined by the Swift standard library like arrays, dictionaries, and strings use an optimization to reduce the performance cost of copying. Instead of making a copy immediately, these collections share the memory where the elements are stored between the original instance and any copies. If one of the copies of the collection is modified, the elements are copied just before the modification. The behavior you see in your code is always as if a copy took place immediately.

Consider this example, which uses the Resolution structure from the previous example:

let hd = Resolution(width: 1920, height: 1080)
var cinema = hd

This example declares a constant called hd and sets it to a Resolution instance initialized with the width and height of full HD video (1920 pixels wide by 1080 pixels high).

It then declares a variable called cinema and sets it to the current value of hd. Because Resolution is a structure, a copy of the existing instance is made, and this new copy is assigned to cinema. Even though hd and cinema now have the same width and height, they’re two completely different instances behind the scenes.

Next, the width property of cinema is amended to be the width of the slightly wider 2K standard used for digital cinema projection (2048 pixels wide and 1080 pixels high):

cinema.width = 2048

Checking the width property of cinema shows that it has indeed changed to be 2048:

print("cinema is now \(cinema.width) pixels wide")
// Prints "cinema is now 2048 pixels wide"

However, the width property of the original hd instance still has the old value of 1920:

print("hd is still \(hd.width) pixels wide")
// Prints "hd is still 1920 pixels wide"

When cinema was given the current value of hd, the values stored in hd were copied into the new cinema instance. The end result was two completely separate instances that contained the same numeric values. However, because they’re separate instances, setting the width of cinema to 2048 doesn’t affect the width stored in hd, as shown in the figure below:

The same behavior applies to enumerations:

enum CompassPoint {
    case north, south, east, west
    mutating func turnNorth() {
        self = .north
var currentDirection = CompassPoint.west
let rememberedDirection = currentDirection

print("The current direction is \(currentDirection)")
print("The remembered direction is \(rememberedDirection)")
// Prints "The current direction is north"
// Prints "The remembered direction is west"

When rememberedDirection is assigned the value of currentDirection, it’s actually set to a copy of that value. Changing the value of currentDirection thereafter doesn’t affect the copy of the original value that was stored in rememberedDirection.

Classes Are Reference Types

Unlike value types, reference types are not copied when they’re assigned to a variable or constant, or when they’re passed to a function. Rather than a copy, a reference to the same existing instance is used.

Here’s an example, using the VideoMode class defined above:

let tenEighty = VideoMode()
tenEighty.resolution = hd
tenEighty.interlaced = true = "1080i"
tenEighty.frameRate = 25.0

This example declares a new constant called tenEighty and sets it to refer to a new instance of the VideoMode class. The video mode is assigned a copy of the HD resolution of 1920 by 1080 from before. It’s set to be interlaced, its name is set to "1080i", and its frame rate is set to 25.0 frames per second.

Next, tenEighty is assigned to a new constant, called alsoTenEighty, and the frame rate of alsoTenEighty is modified:

let alsoTenEighty = tenEighty
alsoTenEighty.frameRate = 30.0

Because classes are reference types, tenEighty and alsoTenEighty actually both refer to the same VideoModeinstance. Effectively, they’re just two different names for the same single instance, as shown in the figure below:

Checking the frameRate property of tenEighty shows that it correctly reports the new frame rate of 30.0 from the underlying VideoMode instance:

print("The frameRate property of tenEighty is now \(tenEighty.frameRate)")
// Prints "The frameRate property of tenEighty is now 30.0"

This example also shows how reference types can be harder to reason about. If tenEighty and alsoTenEighty were far apart in your program’s code, it could be difficult to find all the ways that the video mode is changed. Wherever you use tenEighty, you also have to think about the code that uses alsoTenEighty, and vice versa. In contrast, value types are easier to reason about because all of the code that interacts with the same value is close together in your source files.

Note that tenEighty and alsoTenEighty are declared as constants, rather than variables. However, you can still change tenEighty.frameRate and alsoTenEighty.frameRate because the values of the tenEighty and alsoTenEighty constants themselves don’t actually change. tenEighty and alsoTenEighty themselves don’t “store” the VideoMode instance — instead, they both refer to a VideoMode instance behind the scenes. It’s the frameRateproperty of the underlying VideoMode that’s changed, not the values of the constant references to that VideoMode.

tenEighty alsoTenEighty は変数ではなく定数として宣言されていることに注意してください。 ただし、tenEighty および alsoTenEighty の定数自体の値は実際には変更されないため、tenEighty.frameRate および alsoTenEighty.frameRate を変更することはできます。 tenEighty tenEighty 自体は、VideoMode インスタンスを「保存」しません。代わりに、どちらも舞台裏で VideoMode インスタンスを参照します。 変更されるのは、基になる VideoMode frameRate プロパティであり、その VideoMode への定数参照の値ではありません。

Identity Operators

Because classes are reference types, it’s possible for multiple constants and variables to refer to the same single instance of a class behind the scenes. (The same isn’t true for structures and enumerations, because they’re always copied when they’re assigned to a constant or variable, or passed to a function.)

It can sometimes be useful to find out whether two constants or variables refer to exactly the same instance of a class. To enable this, Swift provides two identity operators:

  • Identical to (===)
  • Not identical to (!==)

Use these operators to check whether two constants or variables refer to the same single instance:

if tenEighty === alsoTenEighty {
    print("tenEighty and alsoTenEighty refer to the same VideoMode instance.")
// Prints "tenEighty and alsoTenEighty refer to the same VideoMode instance."

Note that identical to (represented by three equal signs, or ===) doesn’t mean the same thing as equal to (represented by two equal signs, or ==). Identical to means that two constants or variables of class type refer to exactly the same class instance. Equal to means that two instances are considered equal or equivalent in value, for some appropriate meaning of equal, as defined by the type’s designer.

When you define your own custom structures and classes, it’s your responsibility to decide what qualifies as two instances being equal. The process of defining your own implementations of the == and != operators is described in Equivalence Operators.


If you have experience with C, C++, or Objective-C, you may know that these languages use pointers to refer to addresses in memory. A Swift constant or variable that refers to an instance of some reference type is similar to a pointer in C, but isn’t a direct pointer to an address in memory, and doesn’t require you to write an asterisk (*) to indicate that you are creating a reference. Instead, these references are defined like any other constant or variable in Swift. The Swift standard library provides pointer and buffer types that you can use if you need to interact with pointers directly — see Manual Memory Management(